Sierra Classic 2500 4WD V8-6.0L (2007)
Refer to Fastener Notice.
Install the wheel speed sensor mounting bolt to the wheel hub and bearing.
Tighten the sensor mounting bolt to 18 Nm (13 ft. lbs.).
5. Install the wheel hub and bearing and splash shield to the vehicle, 25/35 series.
6. Install the wheel hub and bearing (5) and splash shield (6) to the vehicle, 15 series.
7. Install the wheel hub and bearing mounting bolts (8), the 15 series.
8. Install the wheel hub and bearing mounting bolts (8), 25/35 series.
Tighten the wheel hub to knuckle bolts to 180 Nm (133 ft. lbs.).
9. Install the nut (2) and washer (3) retaining the wheel drive shaft assembly to the wheel hub and bearing.
Tighten the nut to 240 Nm (177 ft. lbs.).
