Sierra Classic 2500 4WD V8-6.0L (2007)
2. Install the 2-3 shift solenoid (367A) and the 2-3 shift solenoid retainer (395).
3. Install the 1-2 shift solenoid (367A) and the 1-2 shift solenoid retainer (395).
4. Notice:
Be sure all solenoids are installed with the electrical connectors facing the non-machined (cast) side of the valve body; otherwise, the solenoids
will bind against the transmission case as the valve body bolts are tightened and damage may occur.
Important:
When installing the pressure control solenoid, the electrical connector must be in the position 1 shown. Do not use position 2.
Install the pressure control solenoid (377).
5. Notice:
Refer to Fastener Notice.
