Sierra Classic 2500 4WD V8-6.0L (2007)
12. Tighten the left exhaust pipe nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
13. Install the transmission crossmember.
14. Install the transmission crossmember bolts/nuts.
Tighten the bolts/nuts to 95 Nm (70 ft. lbs.).
15. Install the transmission mount nut.
Tighten the nut to 50 Nm (37 ft. lbs.).
16. Remove the support from the transmission.
17. Lower the vehicle.
18. Install the transmission oil level indicator.
19. Lock the transmission oil level indicator.
