Sierra Classic 2500 4WD V8-6.0L (2007)
6. Position the bracket with cable. Install the transmission range selector cable bracket (2) and bolts to the transmission.
Tighten the selector bracket bolts to 25 Nm (18 ft. lbs.).
7. Connect the range selector cable end (2) to the transmission range selector lever ball stud (1).
8. Install the transmission support.
9. Install the transmission support side bracket and bolts.
10. Install the transmission support bolts and nuts.
Tighten the bolts/nuts to 95 Nm (70 ft. lbs.).
11. Install the transmission mount nuts.
Tighten the nuts to 40 Nm (30 ft. lbs.).
