Sierra Classic 2500 4WD V8-6.0L (2007)
8. If equipped with a 4.8L or 6.0L engine, tighten the clutch pressure plate bolts in the sequence shown.
Tighten the bolts to 70 Nm (52 ft. lbs.).
9. Remove the J 5824-A.
10. If equipped with a 4.3L engine, install the clutch disc (1), pressure plate (4), bolts (3), and washers (2).
11. Install J 5824-A in order to align the clutch.
12. Tighten the clutch pressure plate bolts.
Tighten the bolts to 40 Nm (30 ft. lbs.).
13. Remove the J 5824-A.
14. Install the manual transmission. Refer to the following:
^
Transmission Replacement for the NV 3500 transmission
^
Transmission Replacement for the NV 4500 transmission
