Sierra Classic 2500 4WD V8-6.0L (2007)
2. Install the new axle shaft seal using the J 45225 (1) and the J 8092 (2).
3. Install the inner axle shaft into the inner axle shaft housing. Carefully tap the inner axle shaft into place with a soft-faced mallet.
4. Install the inner axle shaft and clutch fork assembly components into the inner shaft housing. Refer to Front Drive Axle Inner Shaft and Inner Shaft
Housing Replacement.
5. Install the inner axle shaft and housing assembly to the differential carrier case assembly. Refer to Front Drive Axle Inner Shaft and Inner Shaft
Housing Replacement.
6. If both the left side bearing and seal was removed, perform the following step. Install the left side bearing with the square shoulder in using the J
36609 (1) and the J 8092 (2).
