Sierra Classic 2500 4WD V8-6.0L (2007)
21. Remove the inner pinion bearing from the pinion using the J 22912-B and a hydraulic press.
22. Remove the outer pinion bearing cup using a hammer and a brass drift in the slots provided. Move the drift back and forth between one side of the
cup and the other in order to work the cups out of the retainer evenly.
23. Remove the inner pinion bearing cup using a hammer and a brass drift in the slots provided. Move the drift back and forth between one side of the
cup and the other in order to work the cups out of the retainer evenly.
Installation Procedure
1. Install the inner pinion bearing cup into the pinion gear bearing retainer using the J 37624 (2) and the J 8092 (1).
