gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13687 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13685

Sierra Classic 2500 4WD V8-6.0L (2007)

Page 2
background image

7. Remove the adjusting nut using the J 2222-C.

8. Remove the adjusting nut.

9. Remove the hub from the axle housing.

10. Remove the rotor, if necessary. Refer to Rear Brake Rotor Replacement.
11. Remove the oil seal from the wheel hub using a suitable seal removal tool.

12. Remove the inner hub bearing.

Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13687 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13685