Sierra Classic 2500 4WD V8-8.1L (2007)
5. Remove the cable handle underneath the instrument panel (I/P).
6. Remove the cable end from the handle.
7. Use needle nose pliers in order to squeeze the tabs in order to remove the cable end from the hood latch assembly.
8. Lift the cable from the lock.
9. Partially remove the park brake pedal assembly to gain access to the hood release cable. Refer to Park Brake Pedal Assembly Replacement .
10. Pull the cable in toward the cable handle through the hole in the cowl.
11. Remove the radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement .
12. Detach the cable from the retainer clips.
13. Disconnect the cable end from the hood latch assembly.
