Sierra Classic 2500 4WD V8-8.1L (2007)
Power Seat Switch: Service and Repair
Power Seat Switch Replacement
POWER SEAT SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the power seat switch bezel from the seat.
2. Remove the power seat switch to bezel screws.
3. Remove the power seat switch.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice.
1. Install the power seat switch to bezel screws.
Tighten the screws to 2 N.m (18 lb in).
2. Install the power seat switch bezel to the seat.
