Sierra Classic 2500 4WD V8-8.1L (2007)
8. Remove the front recliner attachment bolts (4).
9. Remove the recliner screw (5).
10. Remove the U-channel (1).
11. Remove the drive cable, if equipped with a power recliner.
12. Disconnect the recliner cable from the recliner mechanism.
13. Remove the recliner from the seat frame.
Installation Procedure
1. Attach the recliner cable to the recliner mechanism.
2. Install the drive cable, if equipped with a power recliner.
3. Install the U-channel (1).
Notice: Refer to Fastener Notice .
4. Install the recliner screw (5).
Tighten the screw to 10 N.m (89 lb in).
5. Install the front recliner attachment bolts (4).
Tighten the bolts to 53 N.m (39 lb ft).
6. Attach the recliner cable (1) to the folding mechanism (3).
