Sierra Classic 2500 4WD V8-8.1L (2007)
8. Position the battery cable channel into place.
9. Install the battery cable channel bolt.
Tighten the battery cable channel bolt to 9 Nm (80 inch lbs.).
10. Inspect the CMP sensor O-ring for cuts, cracks, tears or damage. Replace as needed.
11. Apply a light film of clean engine oil to the CMP sensor O-ring.
12. Install the CMP sensor. Install the CMP sensor bolt.
Tighten the CMP sensor bolt to 12 Nm (106 inch lbs.).
13. Install the engine harness clips to the battery cable channel.
14. Connect the CMP sensor electrical connector (1).
15. Install the crankshaft balancer.
16. Install the water pump.
