Sierra Classic 2500 4WD V8-8.1L (2007)
Fuel Filler Hose: Service and Repair
Filler Tube Replacement (Cab/Chassis - Rear)
FILLER TUBE REPLACEMENT (CAB/CHASSIS - REAR)
REMOVAL PROCEDURE
1. Loosen the fuel fill pipe hose clamp (2) at the tank.
2. Loosen the fuel vent pipe hose clamp (1) at the tank.
3. Remove the fuel fill and vent hoses from the tank.
INSTALLATION PROCEDURE
1. Install the fuel fill and vent hoses to the tank.
2. Tighten the fuel vent pipe hose clamp (1) at the tank.
NOTE: Refer to Fastener Notice.
3. Tighten the fuel fill pipe hose clamp (2) at the tank.
Tighten the clamps to 2.5 N.m (22 lb in).