Sierra Classic 2500 4WD V8-8.1L (2007)
2. Connect the ball joint stud to the steering knuckle.
3. Notice:
Refer to Fastener Notice.
Install the lower ball joint retaining nut.
Tighten the nut to 100 Nm (74 ft. lbs.).
4. Install the lower control arm 15-series bolts.
5. Install the lower control arm nuts and the 15-series washers.
Tighten the nuts to 175 Nm (129 ft. lbs.).
6. Install the front stabilizer shaft link.
7. Install the shock absorber.
8. Install the tire and wheel.
9. Remove the safety stands.
10. Lower the vehicle.
11. Verify the wheel alignment. Refer to Measuring Wheel Alignment.
