gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13212 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13210

Sierra Classic 2500 4WD V8-8.1L (2007)

Page 5
background image

8. Turn the wheel hub over and install the inner bearing cup.

9. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).

10. Install the inner bearing.

11. Important:  

The rubber outer sealing rings of the oil seal must be driven into the wheel hub first. 

Install the new oil seal using the J 44420 (2) and the J 8092 (1).

12. Install the rotor, if necessary. Refer to Rear Brake Rotor Replacement.
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.

Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13212 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 13210