Sierra Classic 3500 4WD V8-6.0L (2007)
Speaker: Service and Repair
Radio Front Speaker Replacement (Windshield Pillar Speaker)
Radio Front Speaker Replacement (Windshield Pillar Speaker)
Removal Procedure
1. Remove the windshield garnish molding (2).
2. Disconnect the electrical connector (3) to the speaker.
3. Remove the speaker (1) by press until it is out of the molding.
Installation Procedure
1. Press in the speaker (1) until it is fully seated.
2. Connect the electrical connector (3).
3. Install the windshield garnish molding (2).
Radio Front Side Door Speaker Replacement
Radio Front Side Door Speaker Replacement
Removal Procedure
1. Remove the trim panel.
2. Remove the speaker by pushing down on the top retainer.
3. Disconnect the electrical connector.
Installation Procedure