Sierra Classic 3500 4WD V8-6.0L (2007)
Rear Fender: Service and Repair
Rear Fender Replacement (Rear Dual Wheel)
Rear Fender Replacement (Rear Dual Wheel)
Removal Procedure
1. Remove the upper molding rear retainer (1) from the fender.
2. Remove the upper molding from the fender. Use a flat-bladed tool in order to release the top molding retainers.
3. Remove the fuel filler neck from the vehicle, if necessary. Refer to Fuel Tank Filler Door Replacement .
4. Remove the bolts from the front of the fender.
5. Remove the rear tail lamp assembly from the vehicle. Refer to Tail/Turn Signal Lamp Replacement (Except Stepside) .
6. Remove the bolts that retain the fender to the rear pillar. Remove the bolts through the tail lamp opening.