Sierra Classic 3500 4WD V8-6.0L (2007)
8. Turn the wheel hub over and install the inner bearing cup.
9. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).
10. Install the inner bearing.
11. Important:
The rubber outer sealing rings of the oil seal must be driven into the wheel hub first.
Install the new oil seal using the J 44420 (2) and the J 8092 (1).
12. Install the rotor, if necessary. Refer to Rear Brake Rotor Replacement.
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.