Sierra Classic 3500 4WD V8-8.1L (2007)
8. Remove the brake caliper bracket bolts.
9. Notice: Refer to Brake Caliper Notice.
Remove the caliper and caliper bracket as an assembly. Support the caliper with heavy mechanic's wire or equivalent. DO NOT disconnect the
hydraulic brake flexible hose from the caliper.
10. Remove the brake rotor retaining push nuts from the wheel studs, if applicable.
11. It may be necessary to strike the end of the hub or the rotor with a deadblow hammer to separate the rotor from the hub.
12. Remove the rotor by slowly turning the rotor while pulling the rotor away from the axle.
