Sierra Classic 3500 4WD V8-8.1L (2007)
1. Notice: Refer to Fastener Notice in Service Precautions.
If replacing the water crossover install the following:
1. Thermostat (3)
2. Water outlet (1)
3. Water outlet bolts (2)
Tighten the bolts to 30 Nm (22 ft. lbs.).
2. Install NEW water crossover gaskets.
3. Install the water crossover.
4. Install the water crossover bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Install the generator bracket.
6. Install the generator bracket stud.
Tighten the stud to 20 Nm (15 ft. lbs.).
7. Install the generator bracket bolts and nut.
Tighten the bolts and nut to 50 Nm (37 ft. lbs.).
8. Install the power steering pump.
9. Install the generator.
