Sierra Classic 3500 4WD V8-8.1L (2007)
2. Notice:
Refer to Fastener Notice.
Connect the power steering inlet hose (2) to the power steering pump (1).
Tighten the hose connections to 28 Nm (20 ft. lbs.)
3. Bleed the power steering system.
4. Inspect all the hose connections for leaks.
Power Steering Gear Inlet Pipe/Hose Replacement (With Gas Hydroboost)
Power Steering Gear Inlet Pipe/Hose Replacement (With Gas Hydroboost)
Removal Procedure
1. Notice:
Refer to Power Steering Hose Disconnected Notice.
Install a drain pan under the vehicle.
2. Remove the power steering gear inlet hose (1) from the brake booster.
3. Remove the power steering gear inlet hose from the power steering gear.
4. Remove the power steering gear inlet hose from the vehicle.
Installation Procedure