Sierra Classic 3500 4WD V8-8.1L (2007)
Auxiliary Power Outlet: Scan Tool Testing and Procedures
Scan Tool Data Definitions (Non HP2)
SCAN TOOL DATA DEFINITIONS (NON HP2)
Ignition 1 Signal: The scan tool displays the current voltage at the battery.
GEN L-Terminal Signal Command: The scan tool displays OK/No Output. The scan tool displays OK until malfunction is detected on the generator L
terminal circuit, then it reads No Output.
GEN F-Terminal Signal: The scan tool displays 0-100%. The scan tool displays 0-5% until the engine is running, then the percentage value varies
depending on electrical loads.
Powertrain Control Module (PCM)
