Sierra Denali V8-6.0L VIN N (2005)
1. Install the brake caliper bracket.
2. Perform the following procedure before installing the brake caliper bracket bolts.
1. Remove all traces of the original adhesive patch.
2. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
3. Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the brake caliper bracket bolts.
Tighten the bolts to 200 Nm (148 ft. lbs.).
4. Install the anti rattle clips to the brake caliper bracket.
5. Install the brake pads.
6. Install the caliper to the caliper bracket.
