Sierra Denali V8-6.0L VIN N (2005)
15. Install the J 8614-2 (2) and the J 8614-3 (1) into the J 8614-01 (3) as shown.
16. Remove the pinion yoke by turning the J 8614-3 (1) clockwise while holding the J 8614-01 (3).
17. Remove the pinion oil seal. Use a suitable seal removal tool. Do not damage the housing.
18. Remove the outer pinion bearing.
19. Remove the pinion.
20. Remove the collapsible spacer.
21. Remove the inner pinion bearing from the pinion using the J 22912-01 and a hydraulic press.
