Sierra Denali AWD V8-6.0L VIN N (2004)
Tighten
Tighten the clamp to 2.5 N.m (22 lb in).
5. Install the rear axle vent hose to the clip on the fuel fill pipe bracket.
6. Close the axle vent hose clip.
7. Position the fuel tank fill pipe ground wire and chassis harness ground wire (2).
8. Install the fuel tank fill pipe ground wire (3) anti-rotation tab into the frame hole.
9. Install the fuel tank fill pipe ground wire bolt (1).
Tighten
Tighten the bolt to 9 N.m (80 lb in).
10. Lower the vehicle.