Sierra Denali AWD V8-6.2L (2008)
Parking Brake Cable: Removal and Replacement
Parking Brake Intermediate Cable Replacement (JD9, JF3, JF7)
Parking Brake Intermediate Cable Replacement (JD9, JF3, JF7)
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Procedures/Parking Brake Cable Adjuster
Disabling) .
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Disconnect the front park brake cable (2) from the intermediate cable connector by drilling a 3 mm (1/8 in) hole through the dimple in the front to
intermediate park brake cable connector (1).
5. Disconnect the left park brake cable (1) and the right park brake cable (2) from the equalizer bar (3) on the intermediate park brake cable.