Sierra Denali AWD V8-6.2L (2008)
Notice: Refer to Component Fastener Tightening Notice .
2. Install the VSS and O-ring seal.
Tighten the VSS to 16 N.m (12 lb ft).
3. Connect the VSS electrical connector (1).
4. Lower the vehicle.
4L60-E/4L65-E/4L70-E - Automatic Transmission
Vehicle Speed Sensor Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Disconnect the vehicle speed sensor (VSS) electrical connector (2).
3. Remove the VSS bolt (2).
4. Remove the VSS (1).
5. Remove the O-ring seal (3).
Installation Procedure