Sierra Denali AWD V8-6.2L (2008)
Pitman Arm: Service and Repair
Pitman Arm Replacement
Tools Required
*
J 6632-01 Pitman Arm Puller
*
J 29107-A Pitman Arm Puller
Removal Procedure
1. Remove the steering gear. Refer to Steering Gear Replacement (Rack and Pinion) (See: Steering Gear/Service and Repair)Steering Gear
Replacement (Non-Rack and Pinion) (See: Steering Gear/Service and Repair) .
2. Place the steering gear into a vise.
3. Remove the pitman arm nut (1) and washer (2).
4. Remove the pitman arm from the pitman arm shaft using puller J 6632-01 or puller J 29107-A .
Installation Procedure
1. Install the pitman arm onto the steering gear.