Sierra Denali AWD V8-6.2L (2008)
7. Remove the adjusting nut using the J 2222-C .
8. Remove the adjusting nut.
Important: If the oil seal remains on the axle hub, remove the seal using a suitable seal removal tool.
9. Remove the hub from the axle housing.
10. Remove the rotor, if necessary. Refer to Rear Brake Rotor Replacement (JD9) Rear Brake Rotor Replacement (JH6) Rear Brake Rotor
Replacement (JH7) .
11. Remove the oil seal from the wheel hub using a suitable seal removal tool.
12. Remove the inner hub bearing.
13. Remove the inner hub bearing cup using a brass drift and a hammer.
