Sierra Denali RWD V8-6.2L (2009)
Rear Door Window Regulator: Service and Repair
Rear Sliding Window Regulator Replacement
Rear Sliding Window Regulator Replacement
Removal Procedure
Note
The new rear sliding window regulator and cables are serviced as an assembly.
1. Cycle the rear sliding window to the halfway position.
2. Remove the rear lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48) (See: Interior
Moulding / Trim/Trim Panel/Service and Repair)Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48) (See:
Interior Moulding / Trim/Trim Panel/Service and Repair)Rear Window Lower Garnish Molding Replacement (Regular Cab) (See: Interior
Moulding / Trim/Trim Panel/Service and Repair) .
Note
Use a suitable tool to lift upward on the rear sliding window stops (1) to remove.
3. Remove the rear sliding window stops (1).