Sierra Denali RWD V8-6.2L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
2. Install the wheel speed sensor bolt (1) and tighten to 9 Nm (80 lb in) .
3. Connect the wheel speed sensor electrical connector (1).
4. Install the wheel speed sensor electrical connector and sensor harness clips (2) to the inboard frame rail.
5. Perform theDiagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) .
Less Than 3900 KG (8600 Lb) GVW
Rear Wheel Speed Sensor Replacement