Sierra Denali RWD V8-6.2L (2009)
3. Position the park brake pedal assembly on the side panel.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
4. Install and finger tighten the mounting nuts. Tighten the nuts to 25 Nm (18 lb ft) .
5. Connect the park brake warning lamp connection.
6. Install the park brake release handle to the instrument panel.
7. Install the park brake release handle bolt and tighten to 9 Nm (80 lb in) .
8. Install the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair) .
9. Install the left side instrument panel electrical center/junction block. Refer to Instrument Panel Electrical Center or Junction Block Replacement -
Left Side (See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Instrument Panel Electrical Center or Junction Block
Replacement - Left Side) .
10. Raise the vehicle.