gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Evaporative Emission (EVAP) Hoses/Pipes Replacement|Page 6036 > < Evaporative Emission Canister Vent Solenoid Valve Replacement (Rear of Tank)|Page 6031
Page 1
background image

Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement

Evaporative Emission System Hose/Pipe Replacement (Reg Cab With 26 gal Tank)

Evaporative Emission System Hoses/Pipes Replacement (15 Reg Cab w/26 gal Tank)

Removal Procedure

Important:  Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.

1. Remove the fuel tank. Refer to Fuel Tank Replacement (35 Reg/Ext/Crew Cab w/34 Gal Tank)   (See: Fuel Delivery and Air Induction/Fuel

Tank/Service and Repair)Fuel Tank Replacement (15 Ext/Crew Cab w/26 Gal Tank)   (See: Fuel Delivery and Air Induction/Fuel Tank/Service
and Repair)Fuel Tank Replacement (15/25 Reg/Ext/Crew Cab w/34 Gal Tank)   (See: Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair)Fuel Tank Replacement (15 Rec Cab w/26 Gal Tank)   (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair)Fuel Tank
Replacement (25 Ext/Crew Cab w/26 Gal Tank)   (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair) .

2. Remove the EVAP canister purge pipe from the fuel tank clip (1).

Evaporative Emission (EVAP) Hoses/Pipes Replacement|Page 6036 > < Evaporative Emission Canister Vent Solenoid Valve Replacement (Rear of Tank)|Page 6031