Sierra Denali RWD V8-6.2L (2009)
11. If equipped with 4WD, install the fuel hose/pipe clip (1) to the bracket on the transfer case.
12. Install the fuel line clip to the bracket on the automatic transmission.
13. Install the fuel pipe bracket nut to the bellhousing stud. Tighten the nut to 25 Nm
(18 lb ft) .
14. Position and install the BPMV. Refer to Brake Pressure Modulator Valve Replacement (See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Less than 3900 kg (8600 lb) GVW) .
15. Position and install the front propeller shaft, if required. Refer to Front Propeller Shaft Replacement () .
16. Lower the vehicle.
