Sierra Denali RWD V8-6.2L (2009)
6. Reposition the auxiliary battery positive cable boot (5) from the auxiliary battery relay stud.
7. Remove the auxiliary battery positive cable nut (4) from the battery relay stud.
8. Remove the auxiliary battery positive cable from the auxiliary battery relay.
9. Remove the auxiliary battery relay nuts and relay.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
1. Install the auxiliary battery relay and nuts and tighten to 9 Nm (80 lb in) .
