Sierra Denali RWD V8-6.2L (2009)
7. Measure Distance A on the power steering wiring harness extension harness from the previously installed fastener and make a mark. Distance A is
20.5 cm (8 in).
8. Pull any slack out of the two harnesses, hold them together at the mark that was made, and install the appropriate fastener.
9. Measure Distance A on the power steering wiring harness extension harness from the previously installed fastener and make a mark. Distance A is
20.5 cm (8 in).
10. Pull any slack out of the two harnesses, hold them together at the mark that was made, and install the appropriate fastener.
11. Install the power steering assist motor. Refer to Power Steering Assist Motor Replacement (See: Power Steering Assist Motor Replacement) .
