Sierra Denali RWD V8-6.2L (2009)
Caution: Refer to Pipe Wrench Positioning Caution (See: Service Precautions/Vehicle Damage Warnings/Pipe Wrench Positioning Caution) .
3. Place a pipe wrench on the steering gear rack (1) next to the steering linkage inner tie rod housing (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution)
4. Tighten the steering linkage inner tie rod housing (2).
Tighten the steering linkage inner tie rod to 150 Nm (111 lb ft).
5. Install the steering gear boot. Refer to Steering Gear Boot Replacement (See: Steering Gear/Service and Repair) .
