Sierra Denali RWD V8-6.2L (2009)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Control Actuator Replacement
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .
2. Remove the knee bolster. Refer to Knee Bolster Replacement (With RPO SLT) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair)Knee Bolster Replacement (Without RPO SLT) (See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair) .
3. Put the shift lever clevis into the neutral position.
4. Disconnect the electrical connector.
5. Using a small screwdriver, pry the automatic transmission shift lock control actuator away from the steering column jacket and the cable shift cam.
6. Remove the shift lock control actuator.
Installation Procedure
