Sierra Denali RWD V8-6.2L (2009)
Use care not to drop the following items that will be removed along with the spacer plate:
*
The number 1 checkball
*
The 3-4 accumulator spring
*
The 3-4 accumulator pin
8. Remove the spacer plate support (53 or 113).
Note
Do not reuse the bonded spacer plate. Replace with a NEW bonded spacer plate.
9. Remove the bonded valve body spacer plate (48), discard, do not reuse.
10. Remove the 3-4 accumulator piston (2).
Note
Some models do not use a 3-4 accumulator spring.
11. Inspect the 3-4 accumulator spring for cracks.