Sierra Denali RWD V8-6.2L (2009)
7. Using the J 2222-C - wrench , and loosen the adjusting nut.
8. Remove the adjusting nut.
Note
If the oil seal remains on the axle hub, remove the seal using a suitable seal removal tool.
9. Remove the hub from the axle housing.
10. Remove the rotor, if necessary. Refer to Rear Brake Rotor Replacement (JD9) (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JD9))Rear Brake Rotor Replacement (JH6) (See: Brakes and Traction
Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JH6))Rear Brake Rotor Replacement (JH7) (
See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JH7)) .
11. Using a suitable seal removal tool, remove the oil seal from the wheel hub.
