gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

M/T - 3RD Gear Hop-Out on Acceleration or Deceleration|Page 4183 > < M/T - 3RD Gear Hop-Out on Acceleration or Deceleration|Page 4181
Page 31
background image

FIGURE 1 - CALIPER/KNUCKLE CLEARANCES

^

The clearance between the caliper and the steering knuckle upper and lower must be equal right and left. When right and left clearances have been
equalized, add one upper and one lower and the total should be between 0.26 - 0.60 mm (0.010 - 0.024 inches). File knuckle to obtain the proper
clearances.

FIGURE 2

Figure 3

M/T - 3RD Gear Hop-Out on Acceleration or Deceleration|Page 4183 > < M/T - 3RD Gear Hop-Out on Acceleration or Deceleration|Page 4181