Suburban 3/4 Ton 2WD V8-379 6.2L DSL (1986)
Blower Motor: Service and Repair
With Air Conditioning
Front
REMOVE OR DISCONNECT
1. Battery ground cable.
2. Insulator
3. Blower motor lead and ground wires (134).
4. Blower motor cooling tube.
5. Blower assembly.
^ Case attaching screws.
^ Carefully pry the blower flange away from the case if the sealer acts as an adhesive.
6. Blower wheel from motor shaft.
^ Remove shaft nut.
INSTALL OR CONNECT
1. Blower wheel to the motor shaft.
2. Blower assembly.
^ Use a new bead of sealer on the flange.
3. Blower assembly.
4. Blower motor cooling tube.
