Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
1. Relay rod nut (11) from the pitman arm ball stud (5). Do not reuse the nut.
2. Relay rod (14) from the pitman arm ball stud (5) using J 24319-01.
3. Pitman arm nut and washer.
^
Mark the pitman arm and the pitman shaft. This will permit proper alignment at assembly.
NOTICE: Do not hammer on pitman arm, pitman shaft, or puller. Damage to pitman arm or steering gear may result.
4. Pitman arm. Use J 6632-01 or J 29107.
INSPECT
^
Ball stud threads for damage.
^
Ball stud seals for excessive wear.
CLEAN
^
Threads on the ball stud.
Idler Arm Installation