Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
Steering Linkage (C-Models)
Steering Linkage (K-Models)
INSTALL OR CONNECT
TOOLS REQUIRED:
^
J 29193 Steering Linkage Installer (12 mm).
1. Pitman arm on the pitman shaft. Line up the marks made at removal.
2. Pitman arm washer and nut.
TIGHTEN
^
Pitman arm nut to 250 Nm (184 ft. lbs.).
3. Relay rod (14) to the pitman arm ball stud (5). Make sure the seal is on the stud.
^
Tighten J 29193 or J 29194 to 62 Nm (48 ft. lbs.) to seat the tapers. Remove the tool.
4. New relay rod prevailing torque nut (11) to the pitman arm ball stud (5).
