Syclone V6-262 4.3L Turbo (1991)
Heater Assembly Component View
REMOVE OR DISCONNECT
1. Coolant from the radiator.
2. Inlet and Outlet Hoses. Refer to "Heater Hose Replacement".
-
Plug or cap the hoses to prevent spillage.
3. Rear cover and screws.
4. Brackets.
5. Core.
INSTALL OR CONNECT
1. Core.
2. Brackets.
3. Rear cover and screws.
TIGHTEN
-
Screws to 3 Nm (27 lb in).
4. Inlet and Outlet Hoses. Refer to "Heater Hose Replacement".
5. Coolant to the radiator.
