Syclone V6-262 4.3L Turbo (1991)
PARTS INFORMATION
Parts required to complete this campaign will be shipped to involved dealers by GMC Truck on a no charge basis. Any questions pertaining to parts
shortages, etc., should be directed to Adistra Corporation (313) 455-9072.
DO NOT ORDER PARTS FOR THIS CAMPAIGN FROM GENERAL MOTORS SERVICE PARTS OPERATION (GMSPO).
Dealers should submit a warranty claim on each vehicle completed under this campaign.
Identification Label and Administrative Procedure
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label."
Each label provides a space to include the campaign number and five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean, dry surface.
ADMINISTRATIVE PROCEDURE
Procedures covering this campaign are outlined in Section V of your dealership's "GM Truck Claims Processing Manual" # P9119.
Owner Letter
Dear GMC Syclone Owner:
Our records show that you own one of our new 1991 GMC Syclone trucks. The rate at which these trucks have been accepted into the stream of
commerce has been very gratifying to us. In addition, feedback from customers, dealers and our own tracking systems indicate a very high degree of
product reliability thus far.
We have recently become aware of a situation on certain 1991 early production Syclones that may affect the "cold start" performance of your truck. The
Memory and Calibration unit (MEM-CAL) on your truck was not optimally calibrated, and may result in a condition described as idle variation during a
"cold" engine start.
In the interest of maintaining your satisfaction with our product, we would like to correct this condition by replacing the MEM-CAL at no charge to you.
At your convenience, please contact your GMC Truck dealer to arrange a service date. Instructions for making this correction have been sent to your
dealer. Please ask your dealer if you wish to know how much time will be needed to schedule, process and repair your vehicle.
