Terrain FWD L4-2.4L (2010)
5. Remove the brake caliper guide pins (1) and seals (2).
Installation Procedure
1. Apply a light coat of high temperature silicone brake lubricant to the brake caliper guide pins.
2. Assemble the brake caliper guide pins (1) to the guide pin seals (2).
3. Ensure the lip of the seal is fully seated in the groove of the brake caliper guide pin.
4. Install the upper and lower guide pins and seals to the brake caliper bracket.
5. Ensure the lip of the seal is fully seated in the groove of the brake caliper bracket.
6. Position the brake caliper to the bracket.
