Terrain FWD L4-2.4L (2010)
16. Remove the BPMV bolt (1).
Note: Do not pry on the accumulator caps on the underside of the BPMV.
17. Carefully remove the BPMV assembly (1) by pulling straight upward.
18. Inspect the insulators for damage and replace, if necessary.
19. If replacing the BPMV, remove the EBCM. Refer to Electronic Brake Control Module Replacement (See: Antilock Brakes / Traction Control
Systems/Electronic Brake Control Module/Service and Repair).
Installation Procedure
1. Install the EBCM, if removed. Refer to Electronic Brake Control Module Replacement (See: Antilock Brakes / Traction Control
Systems/Electronic Brake Control Module/Service and Repair).
