Terrain FWD L4-2.4L (2010)
3. Install the lower park brake pedal nut (1) and tighten to 10 Nm (89 lb in).
4. Connect the front park brake cable to the park brake pedal clevis (1).
5. Install the front park brake cable to the park brake pedal assembly.
6. Ensure the locking tabs on the cable conduit (2) are fully engaged to the park brake pedal assembly.
7. Connect the park brake warning indicator switch electrical connector.
8. Install the left side body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Hinge Pillar Trim Panel Replacement).
9. Adjust the park brake. Refer to Parking Brake Adjustment (See: Adjustments).