Terrain FWD L4-2.4L (2010)
Caution
Insert a plastic body trim tool between the IP and radio control assembly along the top portion of the radio control assembly as shown in the
illustration. DO NOT use a flat-blade screwdriver to remove the radio assembly.
2. Remove the radio control assembly (1). Refer to Radio Control Assembly Replacement in SI.
3. Carefully align the radio control assembly channels to the locating pegs of the programming tool as shown in the illustration.
4. Carefully seat the radio control assembly onto the programming tool.
5. The display area of the programming tool will indicate when the programming event has been completed. The programming tool will read
"Programming Successful. Remove module." The programming event takes less than 30 seconds to complete.
6. Detach the radio control assembly from the programming tool.
